Safety during Cleaning in Place with IP69K-rated interlocks and safety switches from Fortress

Safety during CIP ensured with IP69K-rated interlocks and safety switches from Fortress


Strict health and safety standards in the food, beverage and pharmaceutical industries require all machinery used in the production process to be thoroughly sanitised at regular intervals to keep equipment clean and eliminate the risk of bacterial contamination. This automated cleaning process, known as Cleaning in Place (CIP), uses a mix of chemicals, heat and water to clean machinery, vessels or pipework without having to dismantle plant.

Because of the high pressures, harsh chemicals and high temperatures used in CIP, an adequate safety system is needed to protect personnel. This safety equipment must itself be able to withstand the CIP process which can seriously damage electronic circuits and instrumentation and cause substances such as dust and food waste to penetrate the equipment, causing it to fail. This usually requires an ingress protection (IP) rating of IP69K – the highest rating available.

Any interlocks and safety switches installed on safety equipment must also be IP69K-rated. Unfortunately most interlocks currently available offer very limited flexibility, focussing solely on achieving IP69K but failing to take into account other safety hazards manufacturers need to safeguard against.

If, for example, access to a machine subjected to CIP is required but there is a possibility that a worker could be hidden from view while inside the machine, there needs to be an effective safeguard in place to ensure the guard door cannot be locked closed and the machine restarted until the worker leaves the danger zone.

The most effective and simple method to achieve this is with a safety key which a worker takes inside the machine to prevent inadvertent start-up.

With this in mind Fortress developed the amGardS40, a range of highly robust, IP69K-rated, stainless steel electro-mechanical safety interlocks and switches specifically designed for the food, beverage and pharmaceutical industries. Modular in design, they allow for many different configurations to satisfy almost any safeguarding application, allowing customers to purchase modules and build up their ideal safety system over a period of time.

Each module of the amGardS40 has a slim 40mm body allowing it to be easily fitted to a 50mm guarding section or other areas where space is limited. The range also enables users to incorporate basic machine control functionality into their interlocking devices. All control elements, including push buttons, lamps, selector switches and e-stops are IP69K-rated and can tolerate extreme CIP conditions. This minimises downtime while simplifying the access procedure as ‘gate release/ machine restart’ can be controlled at the point of entry.

As the amGardS40 IP69K range maintains optimal performance even after being repeatedly hosed down by high-pressure washers and subjected to harsh CIP chemical cleaning agents, it helps manufacturers achieve a high Overall Equipment Efficiency (OEE) rating. It also allows electrical engineers to rest easy, knowing that machinery will not experience constant interruptions due to electrical failures as a result of dust and/or food waste penetrating the casing of the safety switches.


About Fortress Interlocks

Fortress Interlocks is a world leader in safety interlock systems. Its products guarantee that actions and events are undertaken in a pre-determined sequence. This creates a safe working environment where employees are safeguarded from injury and equipment is protected from damage. This helps customers protect their personnel and capital assets.

The company has over 40 years’ experience in the safety market, designing and manufacturing safety access and control systems at its headquarters in Wolverhampton, UK. Fortress is a Halma company.

Next Steps